Rechargeable flashlight Fenix ​​BC05R V2.0

Product Description
549 Kč
Maximum quantity available reached.

The Fenix ​​BC05R V2.0 rechargeable red flashlight offers two power levels - 5 and 15 lumens . In both power levels, it has the function of fast flashing , slow flashing and constant lighting. The built-in lithium-polymer battery with a capacity of 400 mAh is used for power, which is charged via a USB-C connector directly in the flashlight. The light source is five red LEDs, which are hidden under slightly convex optics, which create a wide light cone visible up to an angle of 180 degrees. The effective warning distance of the flashlight is 50 meters, but the light is visible from a distance of up to 230 meters. The flashlight weighs a negligible 28 grams. The package also includes a clip, thanks to which the flashlight can be attached to a backpack, clothing or a headlamp strap. Therefore, it can be used not only as a rear bicycle light, but also as a safety red light when running and hiking.

The design of the holder allows for quick mounting and removal of the bike light without the use of tools. The clamp fits seatposts with a diameter of 20 to 35 millimeters . In fast flashing mode with an output of 5 lumens, the lamp lasts up to 120 hours , the Fenix ​​BC05R V2.0 will provide you with safe lighting for night training, regular commuting to work and endurance races.

All parameters of the lamp (luminous flux, battery operating time, water resistance and afterglow) are measured in accordance with the ANSI/NEMA FL 1-2009 standard.

Parameters of the Fenix ​​BC05R V2.0 bicycle light

  • It uses five red LEDs with a lifespan of 50,000 hours.
  • A total of six power modes: 15 lumens (4.5 hours) -> slow flashing 15 lumens (25 hours) -> fast flashing 15 lumens ( 35 hours ) -> 5 lumens (16 hours) -> slow flashing 5 lumens (80 hours) -> fast flashing 5 lumens ( 120 hours )
  • The flashlight has a built-in Li-pol battery with a capacity of 400mAh.
  • Charging via USB-C connector.
  • Digitally regulated for constant brightness.
  • Low battery warning, protection against overcharging and total battery discharge.
  • Battery charge status indication.
  • The slightly convex optics create a wide light cone visible at an angle of 180°.
  • Warning distance 50 meters, visible from a distance of up to 230 meters.
  • The rubberized construction of the holder sleeve ensures a firm and secure fit.
  • The flashlight is made of impact-resistant plastic.
  • Light dimensions 5.1 cm x 2.2 cm x 2.2 cm.
  • Light weight 28 grams including battery.
  • Waterproof and dustproof according to IP66 standard (sprayed with strong jets of water from all directions).
  • Package contents: flashlight, rubber band, clip, USB-C cable.
  • To charge the flash light with a regular micro-USB cable, you can purchase a micro-USB to USB-C adapter.
  • You can also purchase a USB power adapter and a USB car adapter, a USB adapter that supports fast charging, and a colored USB-C cable.

Using a bike light

To turn the flashlight on or off, press and hold the button on the flashlight for approximately 0.5 seconds. You can switch the power modes at any time during operation by briefly pressing the button (they cycle in the order low 5 lm - slow flashing 5 lm - fast flashing 5 lm - high 15 lm - slow flashing 15 lm - fast flashing 15 lm).

Battery capacity indication - when the flashlight is off, press the button once briefly, then the button backlight will turn on for five seconds. Steady green light indicates a battery charge of more than 85%, green flashing indicates a charge of approximately 50 - 85%, steady red light indicates a charge of approximately 25 - 50% and red flashing indicates a nearly discharged battery (less than 25%).

Low battery warning - if the battery capacity drops below approximately 25%, the flashlight will automatically switch to lower power modes to ensure the longest possible battery life (the flashlight cannot then be switched to higher modes) and the button will start flashing red. In such a case, we recommend charging the flashlight as soon as possible to prevent the protective electronics built into the batteries from turning off and the light from going out when it is discharged.

Charging

  • Lift the rubber cover of the USB-C connector on the back of the flashlight and connect it to a computer, power bank, USB mains adapter or USB car adapter using the included cable. Alternatively, you can use any mobile phone charger with a USB-C connector to charge.
  • The button lights up red during charging, and turns green when fully charged.
  • Charging time is approximately 1.5 hours. The Li-pol battery used does not suffer from memory effect, so the flashlight can be recharged at any time.
  • After charging and removing the power cable, remember to seal the USB connector cap.

Notice

  • Do not disassemble sealed parts yourself, as this will void the warranty.
  • If the flashlight does not switch to a higher mode or does not light up, it may be for one of the following reasons:
    • The battery is discharged - charge it.

You might like it